内孔结构对旋转空化发生器水力特性的影响

空化普遍存在于工业生产、舰船推进、航空航天等领域.使用高速相机对闭式循环试验台的旋转空化发生器内部流动进行试验观测，然后基于RNG k ε湍流模型和Zwart Gerber Belamri空化模型开展了旋转空化发生器流场的数值模拟.结果表明数值模拟结果与试验观测数据吻合较好，验证了本文数值模拟方法的准确性和可靠性.受离心力作用，转子孔内的压力从内径到外径逐渐增大.内孔底部由于轴向旋涡的作用，产生较大旋涡并耗散能量.内孔顶部流体与腔体区主流相互作用，在内孔顶侧产生碰撞并形成较小漩涡.不同内孔结构对旋转空化发生器的空化效果具有重要影响，在相同工况下椭圆形内孔的空化率小于圆锥形和圆柱形，说明型线光滑的内孔结构局部损失小，产生的空化较弱.不同内孔结构下，旋转空化发生器内部压力脉动的主频为转频fi或24fi(对应圆周方向开孔排数)，压力脉动最大幅值出现在进口管侧和出口管侧，主要原因是受动静干涉作用影响.     

构建“突出数字”的教学体系创新“强化实践”的实验方法

本文是对《电工学〈电子技术〉》课程的改革与实践的总结,主要介绍了“强化数字,突出集成,注重实践”的模块化教学体系和阶梯式实验方法.     

平面激光诱导荧光显示火焰中OH的分布图像

用平面激光诱导荧光技术测量了平面火焰炉、原子气化炉和超声速燃烧室的单脉冲激光诱导OH荧光。由平面荧光图可得到氢氧基相对浓度分布和它的厚度。由超声速燃烧室的OH荧光测量 ,可以看出不同时间OH分布的差别。氢氧基的PLIF图像是研究火焰结构和流场的有力工具。     

基于SPARC与RTEMS的飞行控制软件开发技术

实时多任务操作系统的引入改变了传统飞行控制软件开发模式.本文结合RTEMS实时多任务系统部分源代码,深入剖析了该系统的任务管理、任务调度机制、SPARC寄存器窗口管理、中断管理、RTEMS系统初始化及系统配置等关键技术.并结合某型号开发经验,给出飞行控制软件的系统建模、任务划分、任务调度等开发过程.该过程为提高飞行控制软件的实时性、安全性和可靠性提供了很好的保障.     

旋翼着陆器在火星探测中的研究进展

旋翼着陆器是下一轮国际火星探测的重要发展方向.论文首先回顾了火星探测软着陆的发展概况,分析了旋翼着陆器的结构组成、火星探测工作原理及特点.其次,阐述了开展旋翼着陆器设计过程中所需的关键技术.     

Stationary flow fields prediction of variable physical domain based on proper orthogonal decomposition and kriging surrogate model

In this paper a new flow field prediction method which is independent of the governing equations, is developed to predict stationary flow fields of variable physical domain. Predicted flow fields come from linear superposition of selected basis modes generated by proper orthogonal decomposition(POD). Instead of traditional projection methods, kriging surrogate model is used to calculate the superposition coefficients through building approximate function relationships between profile geometry parameters of physical domain and these coefficients. In this context,the problem which troubles the traditional POD-projection method due to viscosity and compressibility has been avoided in the whole process. Moreover, there are no constraints for the inner product form, so two forms of simple ones are applied to improving computational efficiency and cope with variable physical domain problem. An iterative algorithm is developed to determine how many basis modes ranking front should be used in the prediction. Testing results prove the feasibility of this new method for subsonic flow field, but also prove that it is not proper for transonic flow field because of the poor predicted shock waves.     

Numerical analysis and optimization of boundary layer suction on airfoils

Numerical approach of hybrid laminar flow control(HLFC) is investigated for the suction hole with a width between 0.5 mm and 7 mm. The accuracy of Menter and Langtry’s transition model applied for simulating the flow with boundary layer suction is validated. The experiment data are compared with the computational results. The solutions show that this transition model can predict the transition position with suction control accurately. A well designed laminar airfoil is selected in the present research. For suction control with a single hole, the physical mechanism of suction control, including the impact of suction coefficient and the width and position of the suction hole on control results, is analyzed. The single hole simulation results indicate that it is favorable for transition delay and drag reduction to increase the suction coefficient and set the hole position closer to the trailing edge properly. The modified radial basis function(RBF) neural network and the modified differential evolution algorithm are used to optimize the design for suction control with three holes. The design variables are suction coefficient, hole width, hole position and hole spacing. The optimization target is to obtain the minimum drag coefficient. After optimization,the transition delay can be up to 17% and the aerodynamic drag coefficient can decrease by 12.1%.     

基于时频图像形态学的雷达信号IF估计

针对低信噪比下雷达信号的IF估计,提出一种将时频分析和图像处理相结合的估计方法.首先通过时频变换将一维信号转化为二维时频图像;然后采用形态学方法去除时频图像上的噪声点和毛刺,并将其骨骼化;最后采用图像处理中标注连接分量的方法,区分出不同分量的雷达信号以及噪声分量,并通过统计信号分量的行索引和列索引估计出信号的IF.对SFM、LFM和FSK信号的IF估计进行了仿真分析,实验结果表明该方法能够在较低信噪比下有效地估计出信号的IF,同时也适用于多分量信号.     

Generalized Kutta–Joukowski theorem for multi-vortex and multi-airfoil flow(a lumped vortex model)

For purpose of easy identification of the role of free vortices on the lift and drag and for purpose of fast or engineering evaluation of forces for each individual body,we will extend in this paper the Kutta–Joukowski(KJ) theorem to the case of inviscid flow with multiple free vortices and multiple airfoils. The major simplification used in this paper is that each airfoil is represented by a lumped vortex,which may hold true when the distances between vortices and bodies are large enough. It is found that the Kutta–Joukowski theorem still holds provided that the local freestream velocity and the circulation of the bound vortex are modified by the induced velocity due to the outside vortices and airfoils. We will demonstrate how to use the present result to identify the role of vortices on the forces according to their position,strength and rotation direction. Moreover,we will apply the present results to a two-cylinder example of Crowdy and the Wagner example to demonstrate how to perform fast force approximation for multi-body and multi-vortex problems. The lumped vortex assumption has the advantage of giving such kinds of approximate results which are very easy to use. The lack of accuracy for such a fast evaluation will be compensated by a rigorous extension,with the lumped vortex assumption removed and with vortex production included,in a forthcoming paper.